Launch · Launch / Fly
Wind Meter
The only opinion about wind that counts.
| Range | 0 – 30 m/s (0 – 67 mph) |
|---|---|
| Accuracy | ± 3 % or ± 0.3 m/s |
| Units | mph / km/h / m/s / kt / Bft |
| Resolution | 0.1 m/s |
| Power | CR2032, 1 – 2 years |
| Weight | 50 – 90 g |
| Material | ABS housing, sapphire or steel bearings |
|---|---|
| Span / size | 120 × 45 × 20 mm |
| Wind range | 0 – 67 mph |
| Skill level | All levels |
What it is
A handheld anemometer turns “it feels breezy” into 11 mph, gusting 16. That number decides which kite you rig and whether you rig one at all. A cheap vane meter is accurate enough; the expensive ones add logging you will not use.
Safety
Measure at flying height if you can — ground wind is often 30 % lower than the wind at 30 m, and that difference is the whole decision.
Using it
- Take three readings 10 seconds apart; the gust figure matters more than the average.
- Hold the meter clear of your body — you are a wind shadow.
- Log the reading next to the kite you flew; after a season you have a real wind range.
Compatible with
Wind it suits
Wind figures are the range this item is normally used in, not a guarantee. Measure the wind before you launch, and treat the top of the range as a limit rather than a target.
See it in 3D
Why a kite pulls hardest downwind and sits slack overhead, and where the edge of the window actually is. Open the Wind Window Simulator.