Kites · Fly / Store

Parafoil Kite

No frame at all — the wind builds the wing.

Parafoil Kite — workshop line drawing
Specification
Cells7 – 15
FrameNone
BridleMulti-leg, 4 – 12 attachment points
Pack sizeStuff sack, 25 cm
SetupUnder 1 min
Wind range6 – 20 mph
Technical parameters
MaterialRipstop nylon, sewn cells with mesh vents
Span / size1.2 – 3.0 m
Wind range6 – 20 mph
Skill levelBeginner – intermediate
FlyStore

What it is

A parafoil is a sewn ram-air wing: open cells at the leading edge inflate and hold shape under pressure. There is nothing to assemble and nothing to break, and it packs into a stuff sack. It also cannot be flown in rain, and a collapsed cell mid-flight is a walk back down the field.

Safety

A parafoil generates real pull and does not stop generating it when it hits the ground. Wear gloves in wind above 12 mph and keep bystanders behind you.

Using it

  1. Pre-inflate by walking backwards into wind before you let go.
  2. Keep the cell openings clean — sand in the leading edge stops inflation.
  3. Store dry and loose; a folded parafoil creases along the cell seams.

Compatible with

Wind it suits

6 mph 10 mph 16 mph 20 mph

Wind figures are the range this item is normally used in, not a guarantee. Measure the wind before you launch, and treat the top of the range as a limit rather than a target.

See it in 3D

How span, sail area and frame stiffness trade against each other, and when a frame becomes too light for the sail. Open the Kite Builder.