Lines · Build / Balance

Dacron Line

The forgiving default: some stretch, a lot of tolerance.

Dacron Line — workshop line drawing
Specification
MaterialBraided polyester (PET)
Stretch3 – 5 % at 50 % load
Break strength30 / 50 / 80 / 120 lb
AbrasionGood
UV resistanceGood
Knot strength loss20 – 30 %
Technical parameters
MaterialBraided polyester
Span / size0.4 – 1.2 mm diameter
Wind rangeAll ranges
Skill levelBeginner – intermediate
BuildBalance

What it is

Dacron is braided polyester. It stretches 3–5 % under load, which absorbs gusts that would snap a low-stretch line, and it tolerates UV and abrasion better than most. The stretch is also why it is a poor choice for a sport kite, where every centimetre of give blurs the input.

Safety

Dacron holds a knot well but a knot still costs 20–30 % of the rated strength. Use a lark’s head or a proper line-to-leader knot rather than an overhand.

Using it

  1. 50 lb Dacron covers most beginner kites from 6 to 16 mph.
  2. Stretch a new line once before trimming it to length — it will grow.
  3. Replace line that has been dragged across sand; the sheath hides the damage.

Compatible with

Wind it suits

6 mph 10 mph 15 mph 20 mph

Wind figures are the range this item is normally used in, not a guarantee. Measure the wind before you launch, and treat the top of the range as a limit rather than a target.

See it in 3D

The gap between a line’s rated strength and the load a gust puts on it — and why knots matter. Open the Line Tension Simulator.