Kites · Build / Balance

Delta Kite

A swept triangle that flies itself once trimmed.

Delta Kite — workshop line drawing
Specification
Sail area0.7 – 1.4 m²
Frame1 spine, 2 leading-edge spars
BridleKeel or 3-leg, tow point 30 – 38 % back
TailOptional, 2 – 4 m in gusty wind
Pack size130 cm in a sleeve
Typical price bandEntry – mid
Technical parameters
MaterialRipstop nylon or polyester sail, carbon or fibreglass frame
Span / size48 – 96 in (122 – 244 cm)
Wind range5 – 18 mph
Skill levelBeginner – intermediate
BuildBalance

What it is

A delta has no tail and almost no parts: a spine, two leading-edge spars and a keel or a three-point bridle. It launches easily, handles gusts better than a diamond and will sit still overhead. The cost is that it is less tolerant of a badly placed tow point.

Safety

Deltas accelerate in a gust instead of stalling. Keep a hand on the line and let line out rather than holding against a sudden pull.

Using it

  1. A delta that hunts left and right usually has one leading-edge spar stiffer than the other.
  2. Move the tow point forward if the kite wants to fly too high and stall.
  3. In gusty wind a short 2 m tail is worth more than a bigger kite.

Compatible with

Wind it suits

5 mph 10 mph 15 mph 18 mph

Wind figures are the range this item is normally used in, not a guarantee. Measure the wind before you launch, and treat the top of the range as a limit rather than a target.

See it in 3D

How span, sail area and frame stiffness trade against each other, and when a frame becomes too light for the sail. Open the Kite Builder.