Calculator
Kite Size & Wind Range Calculator
Given span, sail area and weight, find the wind range a kite is actually suited to — and the point where it becomes a handful.
Best wind range
- Maximum safe wind
- —
- Recommended line
- —
- Skill level
- —
- Wing loading
- —
- Verdict at target
- —
0limit
v_min = √(2mg / ρ·A·CL) · CL = 0.85 · v_max = v_min × headroom(type)
How this is calculated
The minimum wind is the speed at which the sail generates enough lift to carry the kite’s own weight, with a 25 % margin because a kite at its stall speed is not flying, it is falling slowly. The maximum comes from a structural headroom factor per kite type — a box kite tolerates more than a fighter.
Wing loading (grams per square metre of sail) is the single most useful number here. Below about 90 g/m² a kite flies in almost nothing and gets pushed around; above 260 g/m² it needs wind to stay up and will feel heavy and fast.
Area is the number people get wrong
Published area is often the flat pattern area, not the flying area. A 10 % error in area is a 10 % error in every wind figure below it. Measure the span and the height and estimate, rather than trusting a marketing number.
Outputs
- Best wind range
- maximum safe wind
- line size
- skill level
- risk notes
About the figures
These are planning estimates from a simplified model, printed with the formula so you can check the arithmetic. They are not a measurement of your kite, your line or your wind.
Before you launch
Never fly near power lines. Do not fly in wind above 20 mph. Wear gloves if the wind is above 12 mph. Check your local rules for the site.