Lines · Fly / Balance

Dyneema Line

Strong, thin, and unforgiving of everything.

Dyneema Line — workshop line drawing
Specification
MaterialHMPE (Dyneema / Spectra)
StretchUnder 1 % at 50 % load
Break strength50 / 90 / 150 / 200 lb
AbrasionModerate
UV resistanceModerate
Knot strength loss40 – 50 %
Technical parameters
MaterialHMPE braid, often with a polyester sheath
Span / size0.3 – 0.9 mm diameter
Wind range5 – 25 mph
Skill levelIntermediate – advanced
FlyBalance

What it is

Dyneema (HMPE) is roughly fifteen times stronger than steel by weight with under 1 % stretch. That makes it the line for sport kites and anything where feel matters. It is also slick, so knots slip, and it cuts hands when loaded — gloves are not optional.

Safety

Loaded Dyneema can cut through skin. Wear gloves, never wrap line around a hand, and never let a child hold a loaded sport-kite line.

Using it

  1. Spliced loops keep far more strength than knots on Dyneema.
  2. Use a sleeve or leader at the kite end to take the abrasion.
  3. If it looks furry, retire it — the sheath fails before the core.

Compatible with

Wind it suits

5 mph 12 mph 18 mph 25 mph

Wind figures are the range this item is normally used in, not a guarantee. Measure the wind before you launch, and treat the top of the range as a limit rather than a target.

See it in 3D

The gap between a line’s rated strength and the load a gust puts on it — and why knots matter. Open the Line Tension Simulator.