Launch · Fly / Launch

Line Anchor

For kites that pull harder than you do.

Line Anchor — workshop line drawing
Specification
TypeSand bag or ground screw
Capacity5 – 15 kg of sand
ReleaseQuick-release snap
Line range50 – 200 lb
Filled weight6 – 16 kg
PackedFolds flat
Technical parameters
MaterialCordura bag or steel screw with webbing
Span / size30 – 45 cm
Wind range10 – 25 mph
Skill levelIntermediate
FlyLaunch

What it is

An anchor is a bag you fill with sand or a plate you screw into the ground, with a quick-release for the line. It lets a big box kite or a parafoil sit overhead while you set up, photograph, or eat something.

Safety

An anchor turns a kite into a fixed load. Use a quick-release you can operate under tension, and never anchor a line across a path.

Using it

  1. Fill the bag on site — carrying 15 kg of sand to the field is a waste of a good walk.
  2. Attach the release where you can reach it standing up.
  3. Two-thirds fill is enough for most kites and much easier to carry.

Compatible with

Wind it suits

10 mph 15 mph 20 mph 25 mph

Wind figures are the range this item is normally used in, not a guarantee. Measure the wind before you launch, and treat the top of the range as a limit rather than a target.

See it in 3D

Why a kite pulls hardest downwind and sits slack overhead, and where the edge of the window actually is. Open the Wind Window Simulator.