Repair · Store / Launch

Sandline

A weighted line that keeps a kite on the ground.

Sandline — workshop line drawing
Specification
Length1.5 – 3 m
Weight200 – 600 g
MaterialDacron with sand bag
AttachmentSnap clip
GroundSand, grass
UseParked kite only
Technical parameters
MaterialDacron line with a sand-filled pouch
Span / size1.5 – 3 m
Wind range10 – 25 mph
Skill levelBeginner
StoreLaunch

What it is

A sandline is a short weighted line clipped to the kite when it is parked on the beach or the field. It stops the sail flapping itself to death while you set up, and stops the kite leaving without you when a gust arrives.

Safety

A sandline is not an anchor for a flying kite. It holds a parked kite; it will not hold one that is generating pull.

Using it

  1. Clip to the bridle, not the tail — the tail will tear out.
  2. Fill the pouch on site; sand is heavy to carry.
  3. Lay the kite nose-down into wind while it is parked.

Compatible with

Wind it suits

10 mph 15 mph 20 mph 25 mph

Wind figures are the range this item is normally used in, not a guarantee. Measure the wind before you launch, and treat the top of the range as a limit rather than a target.

See it in 3D

How span, sail area and frame stiffness trade against each other, and when a frame becomes too light for the sail. Open the Kite Builder.